Ga naar de inhoud
DAYLYRIDEDAYLYRIDE
0
Understanding the DAYLYRIDE Ebike Error Code & Default Parameter Codes

Understanding the DAYLYRIDE Ebike Error Code & Default Parameter Codes

I believe that when you are riding DAYLYRIDE Bike, you have more or less encountered the situation that the e-bike has problems and needs to reset parameters. Today, let’s teach our riders some related parameter settings and the parameters represented by the codes.

Error code (error code starting with E)

 Error Code Problem Parts
E00 Normal
E02 Brakes
E06 Battery undervoltage
E07 Motor failure
E08 Turn malfunctioning
E09 Controller failure
E10 Communication reception failure
E11 Communication dispatch failure

 

Regarding error codes, we often receive feedback from customers that E10.

There is a corresponding solution for this error code:

If E10 is present, you need to disconnect the cable connectors of all parts individually to check whether the E10 disappears.

To determine which part can cause E10 to disappear when its cable interface is disconnected. You can try to disconnect the cables of the ebike parts individually, and check if the E10 disappears after disconnecting the cable of one of the parts, if the E10 disappears, it means that the corresponding part of the disconnected cable is faulty. ( Please note that only disconnect the cable of one component at a time, and then check whether E10 disappears. If E10 still exists, reconnect the cable, continue to disconnect the cable of another component, and continue to troubleshoot.)

Default Parameter Codes

Restore default setting method:

Start the power, press the + & - button at the same time, then press the power button to enter P01-P20, and press the + / - button to adjust the number of the setting.

 

+/- button
Folding series "+" and "-" button positions
+/- Button Location
Mountain Series +/- Button Location

P1 to P20 are adjusted to the corresponding numbers, after each adjustment, press the + & - button at the same time to save.

 

DAYLYRIDE Ebike P01 - P20 Default Parameter Settings

 Adjust Code Adjustment Parts Adjust Value Celection
P01

Backlight brightness

001/002/003

P02

Mileage unit 000/001
P03 Voltage level 048
P04 Dormancy time 010
P05 PAS number selection 001
P06 Wheel setting 20/26/27.5
P07 Speed gauge magnetic steel number 001
P08 Speed limit setting 100
P09 zero start, non-zero start setting 000
P10 Riding mode 002
P11 Help sensitivity setting 003
P12 Help start intensity setting 003
P13 Power Magnetic Steel Disk Type Setting 012
P14 Controller limit value setting 015
P15 Controller undervoltage 39
P16 ODO zero setting 000
P17 Automatic cruise optional 000
P18 Display speed ratio adjustment 100
P19 Zero PAS selection 000
P20 0:2 Protocol 1:5 S Protocol 2: Standby 3: Standby 000

 

If you still don't understand how to set it up, click here to learn more.

Conclusion

If you have any questions, you can solve them according to the above methods. If there is really no way to solve them, you can contact us through the website or email. We offer a two-year warranty on every order, if you have any questions, please don't be shy to contact us and we will answer you as soon as possible.

Laat een reactie achter

Uw e-mailadres wordt niet gepubliceerd..

Winkelwagen 0

Uw winkelwagen is momenteel leeg.

Begin met winkelen